Do you have a question about Mayne Products? Our customer service team would be happy to help.
Browse our Help Centre for frequently asked questions, instruction sheets, and line drawings.
Can’t find what you’re looking for? Start a live chat with us using the chat button in the bottom right hand corner of your screen. Customer service agents are available Monday through Friday between the hours of 8:00 a.m. and 5:00 p.m. EST. Browsing outside of those hours? Leave us a message or send us an email at [email protected].
Prefer to chat over the phone? Give us a call toll free at 1-866-363-8834.
We want to see how our customers have used our products to enhance the curb appeal of their homes! Send us a photo to qualify for a cash prize!*
To submit a photo to our photo contest please email your images to [email protected]
1st Place $500
2nd Place $300
3rd Place $200
Photography Tips and Tricks:
Photograph the planter in its natural setting.
Make sure the planter is as clean as possible.
Try taking the picture with and without the flash to see what works best. Sometimes flash from a distance helps fill in the photo but sometimes when it’s too close you will have harsh shadows.
Avoid taking a picture of your planter in the direct sunlight (it will blow out the photo). A cloudy day is always better.
Zoom in so the planter and plants fill the picture but please be sure not to cut off the planter in the photo.
Take a photo from a short distance to “set the scene” or portray an “atmosphere”.
The planter should be showing at least 80% in the photo. Don’t let your plants overtake your photo.
Take the photo mid-season so you’re showing not too little and not too much of the actual plants.
Large photo files are a must so if you have the ability to take a large photo with your phone go for it but if you have a digital camera that might work better.
*To qualify for prizes, images must be submitted in high resolution (300dpi, min 2000×2000 pixels). Additional photos and angles may be requested and photos will become the property of Mayne Inc. to be used as we see fit.
For occasional surface cleaning, we have found that the following products work very well along with a quick rinse from your garden hose:
For a deeper clean, we recommend the use of a high power pressure washer. As polyethylene is slightly porous, small dirt particles can become trapped over time and a power washer, used up good and close will be able to really blast the dirt away. Don’t worry about damaging the planter when cleaning with the power washer. Our products do not have any type of finish so there is no risk of harming the outside.
It may take some time to remove all of the dirt and stains, but with the pressure washer on the highest setting, you’ll find that the results are fantastic!
Mayne products are designed in Canada and manufactured in the United States.
We carry three products that are an exception to the above. Our Yorkshire Collection, the No-Dig Ground Anchor, and the Adjustable Deck Rail Bracket. They are made from vinyl and stainless steel, respectively. Due to the difference in material, these items are imported.
We do not recommend painting our products. Our products are manufactured from polyethylene, which is an oil based plastic. We have found that paint typically does not adhere to it very well; it tends to peel and flake off over time.
That being said, there is a paint on the market that is called “Fusion for Plastic” made by Krylon, which some of our customers have used with success. Please be advised that painted products cannot be returned and that painting the product will also void the warranty.
Our Yorkshire model window boxes are made of vinyl and can be painted with any paint designed for use on vinyl. Painting our Yorkshire models will not affect their warranty.
When creating any product, the quality of the material makes all the difference. That’s why we only use 100% high-quality polyethylene resin sourced from the United States and Canada.
We only purchase material from industry-leading resin suppliers to ensure our products maintain the highest level of consistency. Unlike other garden products, Mayne products do not require painting, staining, or any other additional preparation.
We’re confident in the quality of our material and back our products with a 15-year residential warranty.
If materials or manufacturing workmanship are found to be defective, Mayne will at its sole discretion either replace the defective material or refund the product. Labor, installation and any similar costs are excluded specifically, and shall not be paid by Mayne in any event.
Any defects in materials and workmanship.
The manufacturer of this product does not recommend or approve this product for all possible end-use applications. Your local Code Authority should be consulted regarding its safety and applicability for intended usage.
This warranty gives you specific and legal rights, and you may also have other rights which may vary from state to state, or province to province.
Damage caused by failure to comply with Mayne installation guidelines, by faulty installation, improper application, or in violation of codes or restrictions.
Damage attributable to fire, violent storms, earthquake, ground movement or any other casualties; or to exposure of atmospheric pollutants or conditions other than natural weathering processes.
Damage or discoloration due to misuse, abuse, improper storage, impact of objects, or to the alteration of the product by applied heat or welding, by contact with solvents, epoxies, paints, chemicals or other substances; or by other physical or material alterations.
Damage caused by Animals and/or Wildlife
Natural fading that occurs over time due to normal weathering.
Any materials not manufactured or supplied by Mayne.
Cost of installation, removal, labor, freight and similar related costs.
Any incidental or consequential damages.
All molded products are covered by warranty for 15-years Residential / 5-year Commercial.
Only applicable with the original owner of the real estate upon which this product is used.
All hardware related items are covered by a 1-year limited warranty.
All Mayne Mail posts (with the exception of the Bradford) ship in 2 separate boxes; the Mailbox support Arm, and the Decorative Post. It is common for the boxes to be separated in transit and you will often receive the 2nd package within 1-2 business days of delivery of the 1st.
If you do not receive both boxes after a few days please call our Customer Service Department at (toll-free) 1-866-363-8834, and we would be happy to assist you.
Please note that if you purchased a Mailbox or an address plaque with your mail post, these parts will be shipping from a separate Manufacturer. If you have any inquiries regarding receipt of these items, we recommend contacting the company you made your purchase through.
If you are missing any installation hardware please review the instruction sheet that was included with your new Mayne product. At the top of the instruction sheet, you will see a “Materials List” heading. Please compare hardware received to hardware on the instruction sheet. In the case of any missing parts, please contact our Customer Service Department and we will be more than happy to send any parts that were not included.
email: [email protected]
Please Note: 4×4 wood post, mailbox, and mailbox mounting hardware NOT included with any Mayne Mail Posts or Address Signs. You can purchase these items at any local hardware store in your area.
Did your order arrive with shipping damages?
We are sorry to hear your item was damaged during shipping but don’t worry we would love to assist you. Please send images of the damaged product as well as the damaged box to our Customer Service Department at [email protected] for further assessment. Once the images are reviewed our Customer Service team will determine the course of action.
If our Customer Service Team determines your item to be damaged during shipping a replacement item will be sent to you at no charge and we will update you with the tracking information.
For further assistance please call our Customer Service Department at 1-866-363-8834.
Not satisfied with your purchase?
We’d be happy to process a return for you within 30 days from the date of purchase. The returned product must be in the original packaging and in unused, re-sellable condition in order to receive credit. Proof of purchase is required.
Please contact our customer service department with proof of purchase and they will send you a return label. Once all packages are labeled, please drop them off at your nearest FedEx Drop-off location for return shipping. FedEx parcels can also be dropped off at any Walgreen’s location.
Please be advised that credit may be denied if the returned product is in used condition or is not in the original packaging.
Once the product has been received back to our warehouse and verified in good condition, a refund for the full amount of your order will be applied to your credit card.
Purchase a Mayne product through an online vendor?
If you’ve purchased a Mayne product through one of our online vendors, you will need to adhere to their return policy. Please reach out to the vendor directly to arrange your return.
How to make a warranty claim:
Please send photos of the product to our customer service department. Our quality control and warranty team will review the concern and determine if an exchange/replacement is warranted.
Please note, if the product was not purchased directly from gomayne.com, we are unable to provide a refund. However, we are happy to exchange any items that are determined to have warranty defects.
Please be sure to showcase the area of concern when sending in photos. For example, our window boxes have an overflow drainage hole built into them that allows excess water to drain out. If you’re noticing water leaking from a second location, please be sure to highlight the second location in your photo.
Proof of purchase is required. If you purchase a Mayne item through one of our online vendors, we will likely have a record of your shipment. In that case, you will only need to provide your name and the address that the order was shipped to. If you purchased through Amazon or in a brick & mortar store, we will need a screenshot of your order confirmation and or purchase receipt.
Still have questions? Give us a call at 866-363-8834 or email us at [email protected]
The trick to removing your Mayne Window Box from its mounting brackets is to use something flat like a flat head screwdriver to “pry” the bottom of the window box from the brackets. Once you have the window box popped out from the mounting brackets, you should be able to slide the window box out and remove it from the side of your home.
Still have questions? Send us an email to [email protected] and we would be happy to send you further information and photos detailing this process.
The following styles of planter all have a water reservoir underneath the planting area:
With the water reservoir, capillary action allows water in the reservoir to soak upward keeping the soil and plant roots moist creating a “self-watering” effect.
Regular watering is required for the first few weeks giving the root system time to develop. Once the roots have grown down into the troughs of the planters, the plants will be able to pull moisture from the reservoir. With this system, you will find the potting mix stays moist longer than traditional planters. To avoid over-saturation an overflow hole allows excess water to drain out.
Although “self-watering” containers still need to be watered, they need to be watered less frequently than your typical planter.
How often you need to water will depend on a number of factors including, climate, sun exposure, rain exposure, etc. As a general rule, we recommend watering once per week once your plants are established. Many will likely find they will need to water less frequently than this. If the potting mix begins feeling dry simply continue to add water until excess begins coming out of the overflow drain hole. This will ensure the potting mix is well soaked and the reservoir completely filled. You will get into a routine with your plants after a couple of weeks.
For our Planters that have the Water Reservoir feature, the reservoir can be filled just by watering your plants as normal. Any excess water that the potting mix is unable to absorb/hold, will filter through the potting mix and fill the reservoir.
You will know that the reservoir is full when you begin to see water coming out of the overflow drain hole (see How do I know the Reservoir is Full?).
Alternatively, you may also wish to drill the optional Fill Porthole to create direct access to the reservoir.
When planting, we recommend using a “Lightweight Filler” to decrease the overall weight of the planter. Larger planters and window boxes can take bags and bags of soil which is not only expensive but can also be very heavy. For window boxes, this puts extra stress on the mounting brackets holding your box up. The weight of the soil is heavy to move, and may also cause issues of the weight compressing and compacting the soil affecting drainage and root growth. To solve these issues try using a lightweight filler to fill the bottom of your planters.
What can be used?
The basic purpose of the fill/port hole is to give direct access to the reservoir in order to fill it faster or drain it entirely. This is a completely optional feature and if you would prefer to not drill into your planter it will still function normally.
To cover the hole we have included a rubber plug that can be easily removed to fill or drain the planter as needed. The reservoir will still fill without the hole by excess water filtering through the soil.
Once the reservoir of your planter is filled to capacity, water will start seeping out of the overflow drain hole. Always make sure there is a clear passageway out of the drainage hole to ensure water can escape.
This overflow drainage hole is manufactured/pre-drilled in all of our window boxes and Patio Planters.
Our Tall Planters require you to drill your own drainage hole. The hole is not pre-drilled in our tall planters so they can be used indoors if you would like.
Once the water starts seeping out of the overflow drain hole the reservoir is full. Always make sure there is a clear passage way out of the drainage hole to ensure water can escape.
The Overflow drain hole is manufactured/pre-drilled in all of our window boxes and Patio Planters.
Our Tall Planters require you to drill your own drainage hole. The hole is not pre-drilled in our tall planters so you can use it indoors if you would like.
All of our window boxes are molded with the back matching the front so that they can be used as independent planters and be viewed from all sides. The window boxes also have small “feet” on the base of the window box that prevents the overflow drainage from being blocked when used on the ground.
When installing onto vinyl or metal siding:
We recommend using plywood strapping (1”x4” plywood is suitable) in order to add strength and support.
Step1) Attach the board to the siding where you would like your Window Box to sit than
Step 2) Once the holes are pre-drilled, drill the brackets into place.
Step 3) After the brackets are secure slide your new Window Box into place.
When installing your window box to brick or concrete walls:
Masonry screws or anchors are recommended.
Step 1) Pre-drill holes into the brick or concrete where the brackets will be placed.
Step 2) Once the holes are pre-drilled, drill the brackets into place.
Step 3) After securing the brackets, slide your window box into place.
Please note: our molded window boxes (such as the Fairfield, Cape Cod, and Valencia models) do not require any assembly.
All Mayne Tall Patio Planters have a removable tray to plant directly on top of. If you would like to remove the tray, push down firmly on one corner and lift up on the opposite corner.
Don’t be afraid to use as much force as needed to get the tray to pop out of place, the tray will bend and flex around the walls of the planter and this is fine. The material is extremely durable and you will not damage it at all by doing this.
The trays can also be flipped upside down to create a raised platform for a potted plant. Similar to the removal, a little extra force may be needed to drop the tray back into position.
Still have questions? Email us at [email protected] for further details and some photos to further illustrate this process.
When a Planter or Window Box-wall begins to bulge out, it is typically due to a drainage issue. (see How does my planter drain excess water?) Please check the underside of your Planter/Box to ensure that nothing is blocking the drainage hole. If you find that there is a blockage, go ahead and clear the hole using something long and pointy (a coat hanger wire or something to that effect, should do the trick). Water should then be expelled through the drainage hole.
The material Mayne products are made from has an incredible memory, so after the water drains from the planter, it will slowly return to its original form. Leaving the window box or planter out in a warm, sunny area can help to speed up this process!
If this method of clearing the blockage is unsuccessful, the easiest solution to the problem would be to drill another small hole in the backside of the planter/box for extra drainage. This option is also recommended for those who may have their boxes situated in an area that receives a moderate amount of rainfall.
Mayne products are designed to last in all types of weather conditions – they can even be left outside during the winter months. Just be sure that your planters are draining properly and remove as much water from them as possible but tilting them slightly towards the overflow drain hole.
If you do decide to bring them in, here are some Winter Storage tips:
Mayne Patio Planters can be stored outdoors or in your garage or shed without worry. Even with some water left in the reservoir, there is no risk of cracking as our double-walled design will allow room for the water to expand when freezing.
Don’t let the cold and snow deter you from using your Mayne planters! Try dressing them up with some greenery or holiday ornaments to add some color to your home and garden during the winter months!
The Yorkshire Window Box is available in 7 sizes from 2 to 8 feet. At Mayne we understand not all windows are the same size and customization may be required for our customers desired look.
Step 1: Dry fit the window box (pre-assembled without any glue). Hold the window box in place and measure the preferred width of the box.
Step 2: Take apart the front, back, and bottom panels. Mark off the desired cut lengths using a marker and a straight edge. (Example: You purchased a 3FT Window box but your window is only 32inches in length- simply cut off 4 inches).
Step 3: Using a fine-toothed saw cut the panels along the line created by the marker. Be sure to use a proper blade that is able to cut plastic.
Step 4: Make sure that all 3 panels have been cut to the exact same length. Once this is confirmed refer to the Yorkshire Window Box instruction sheet for final assembly.
We do not recommend adding casters/wheels to the bottom of our Planters. Each of our Planters has a double-walled design creating our water reservoir feature; the plastic walls are about 1/8” thick and the section directly beneath the floor of the planter is hollow so that it may be filled with water. Drilling holes in the bottom would ruin the water reservoir feature and there would be nothing to drill into to keep the casters in place.
Please note making any structural changes to the Planters would also void the 15-year warranty offered with our products.
A great solution for making your heavy planters mobile would be to create a platform for them to sit on and attaching the casters to the bottom of the platform. A platform can be made from a piece of pressure-treated plywood cut so that it is just slightly smaller than the base of your planter.
Another handy idea would be to add a lightweight Filler which would make your Planter lighter and easier to move without any additional hardware or modifications.
When installing your mailbox to your new Mayne Mail Post, the steps to follow will depend on the type of support arm you have.
Attaching the Mailbox to our Standard Arm: In order to install your Mailbox to the Mayne Post Arm, you will need a mounting board (a pressure treated board cut to the appropriate size to fit into the lip of the bottom of the Mailbox). Most Mailboxes come with a lip on the bottom and it is very important that the mounting board can sit flush inside the mailbox.
Step 1) When the mounting board is cut to size, use wood screws to attach the board to the mailbox arm at a 90-degree angle.
Step 2) Once the board is securely in place attach the mailbox to the board with screws through the holes on each side of the mailbox.
Please note: Mounting board, Mailbox, and mailbox hardware not included
Attaching the Mailbox to the Newspaper holder: In this case, the mounting board is not required.
Step 1) Pre-drill 4 holes with a 3/8″ drill bit through the mailbox and paper holder arm.
Step 2) Using a nut, bolt, and washer combination secure the mailbox to the arm and tighten (2″ Bolts are recommended).
Please note: Mailbox and hardware not included
For full instructions with diagrams, please contact our customer service team at [email protected] and we will be happy to send you a printable copy.
When picking out a mailbox for our mail posts, the physical dimensions of the mailbox are less important than the actual weight of the mailbox.
Newport, Westbrook, or Charleston Mail Posts:
For these models, we recommend a mailbox that is no heavier than 8 lbs. We have found that the following manufacturers offer a number of mailbox options that will work well with these particular posts:
Metal Mailboxes – http://www.gibraltarmailboxes.com/mailboxes.php?ProductSubType=Traditional%20Rural
Plastic Mailboxes – http://postalpromailboxes.com/plastic-mailboxes/
Dover, Signature Plus, Charleston Plus, and Rockport Mail Posts:
For these models, we recommend a mailbox that is no heavier than 12 lbs. We have found that the following manufacturers offer a number of mailbox options that will work well with these particular posts:
Salisbury – http://www.mailboxes.com/departments/residential-mailboxes/post-mounted/rural-mailboxes/
Postal Pro – http://postalpromailboxes.com/product/the-carlton/
Gibraltar – http://www.gibraltarmailboxes.com/mailboxes.php?ProductSubType=Traditional%20Rural&page=1
While there is no single specific mailbox that we recommend for any of our mail posts, as that is a personal preference, the above manufacturers have a wide selection that many of our customers have paired up with our mail posts and the results are fantastic!
Please note: some of these manufacturers do not sell direct to customers, but their products are widely available online, as well as in many major retailers like Lowe’s & Home Depot.
Our Liberty Lamp Post can be paired with our “standard arm” support bracket (can be found on our accessories page), from which an address plaque can be hung. The arm attachment will not work with our Signature Lamp Post as the inset panel within which the arm would sit is a little too narrow.
Our lamp posts are designed as a decorative sleeve to slide over an existing lamp post or can be purchased with the 3” diameter aluminum pipe for a new installation. When installing the bracket on the lamp post, be sure to use screws that are able to tap into the metal pipe that is inside the decorative sleeve (being careful not to hit any wires). It is important that a connection is made with the metal pipe inside so that it can support the weight of the sign.
Please note that this is a custom installation. This arm was not specifically designed for this use and we, therefore, cannot make any guarantees on the performance of this installation.
While this is not something we have tested ourselves, it could certainly be done with the help of a certified electrician and a little modification to the post. The material that the post is made of can be cut fairly easily using a fine tooth saw or regular utility knife to make an opening for the outlet. The base of the post should have enough room to accommodate a standard small outdoor outlet, as this section of the post measures about 9.5” in width and 6.5” in height, and there is roughly 3.5” of space available on each side of the aluminum pipe within the post.
Any questions regarding the mounting or wiring of the outlet should be directed to your local electrician.
Please be advised that once any modifications are made to the lamp post it cannot be returned and the warranty will be voided.